| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) | 24 V |
| ● Reverse polarity protection | Yes |
| Input current |
| from load voltage L+ (without load), max. | 290 mA |
| from backplane bus 5 V DC, max. | 120 mA |
| Power loss |
| Power loss, typ. | 3 W |
| Analog outputs |
| Number of analog outputs | 4; Isochronous mode |
| Voltage output, short-circuit protection | Yes |
| Voltage output, short-circuit current, max. | 40 mA |
| Current output, no-load voltage, max. | 18 V |
| Output ranges, voltage |
| ● 0 to 10 V | Yes |
| ● 1 V to 5 V | Yes |
| ● -10 V to +10 V | Yes |
| Output ranges, current |
| ● 0 to 20 mA | Yes |
| ● -20 mA to +20 mA | Yes |
| ● 4 mA to 20 mA | Yes |
| Load impedance (in rated range of output) |
| ● with voltage outputs, min. | 1 kΩ |
| ● with voltage outputs, capacitive load, max. | 1 µF |
| ● with current outputs, max. | 500 Ω |
| ● with current outputs, inductive load, max. | 1 mH |
| Cable length |
| ● shielded, max. | 200 m |
| Analog value generation for the outputs |
| Integration and conversion time/resolution per channel |
| ● Resolution with overrange (bit including sign), max. | 16 bit |
| ● Conversion time (per channel) | 200 µs; in isochronous mode 640 µs |
| Settling time |
| ● for resistive load | 0.2 ms |
| ● for capacitive load | 3.3 ms |
| ● for inductive load | 0.5 ms |
| Errors/accuracies |
| Operational error limit in overall temperature range |
| ● Voltage, relative to output range, (+/-) | 0.12 % |
| ● Current, relative to output range, (+/-) | 0.18 % |
| Basic error limit (operational limit at 25 °C) |
| ● Voltage, relative to output range, (+/-) | 0.02 % |
| ● Current, relative to output range, (+/-) | 0.02 % |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes; Parameterizable |
| Alarms |
| ● Diagnostic alarm | Yes; Parameterizable |
| Diagnoses |
| ● Diagnostic information readable | Yes |
| Diagnostics indication LED |
| ● Group error SF (red) | Yes |
| Potential separation |
| Potential separation analog outputs |
| ● between the channels | Yes |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | Yes |
| Isolation |
| Isolation tested with | 1 500 V DC |
| connection method |
| required front connector | 20-pin |
| Dimensions |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 117 mm |
| Weights |
| Weight, approx. | 220 g |
